Datalogic Heron D150-EAS Manual de instrucciones descargar pdf (Pagina 11)

1 DEFAULT

UK Read the RESTORE DEFAULT.

I Leggere il codice che ripristina i default.

F Lecture du code de configuration par défaut.

D Lesen Sie den Restore Default Code, um die

Werkseinstellung wieder herzustellen.

E Lea el código de reastauración predefinida.

RESTORE DEFAULT

Ì$+$*oÎ

RS232 Standard DEFAULT SETTINGS

9600 baud, no parity, 8 data bits, 1 stop bit, no handshaking,

delay disabled, rx timeout 5 sec., ack/nack disabled, FIFO

enabled;

DATA FORMAT: code identifier disabled, no field adjustment,

code length not transmitted, no header, terminator = CR-LF.

character replacement disabled

RS232 Nixdorf DEFAULT SETTINGS

9600 baud, parity odd, 8 data bits, 1 stop bit, handshaking

hardware (RTS/CTS), delay disabled, rx timeout 9.9 sec.,

ack/nack disabled, FIFO disabled, serial trigger lock disabled;

DATA FORMAT: code identifier enabled, no field adjustment,

code length not transmitted, no header, terminator = CR,

character replacement disabled

RS232 Fujitsu DEFAULT SETTINGS

9600 baud, no parity, 8 data bits, 1 stop bit, no handshaking,

delay disabled, rx timeout 2 sec., ack/nack disabled, FIFO

enabled, serial trigger lock disabled;

DATA FORMAT: code identifier enabled, no field adjustment,

code length not transmitted, no header, terminator = CR,

character replacement disabled

RS232 ICL DEFAULT SETTINGS

9600 baud, parity even, 8 data bits, 1 stop bit, handshaking

RTS always on, delay disabled, rx timeout 9.9 sec., ack/nack

disabled, FIFO enabled, serial trigger lock disabled;

DATA FORMAT: code identifier enabled, no field adjustment,

code length not transmitted, no header, terminator = CR,

character replacement disabled

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 19 20

Sin comentarios

Datalogic Heron D150-EAS Manual de instrucciones Pagina 11