Datalogic DX8200A Manual de instalación descargar pdf (Pagina 86)

DX8200A

6 TROUBLESHOOTING

NOTE

Before contacting your local Datalogic office or Datalogic Partner or ARC,

it is suggested to save the device configuration to a *.ddc file by means of

the Genius™ software configuration program and check the device exact

model and serial number.

TROUBLESHOOTING GUIDE

Problem Suggestion

Power On:

the “Power On” LED is not lit.

• Is power connected?

• If using an external power supply (like PWR-

120), is it connected to the AC source?

• If using rail power, does rail have power?

• If using C-BOX 100, does it have power

(check switch and LED)?

Check if you are referring to the

26-pin connector or to the C-BOX 100 spring

clamp connectors.

• Measure voltage at pin 13 and 25 (for 26-pin

connector) or at spring clamp 1 and 2 (for

C-BOX 100).

On Line Mode:

the Master’s “Phase On” LED is not lit

(when external trigger activates).

• Check carefully if you are referring to the

26-pin connector or to the C-BOX 100 spring

clamp connectors.

• Is sensor connected to EXT TRIG/PS input?

• Is power supplied to photo sensor?

• Is power supplied to one out of the two EXT

TRIG/PS (NPN output)?

• Is one out of the two EXT TRIG/PS grounded

(PNP output)?

• Are the photo sensor LEDs (if any) working

correctly?

• Is the sensor/reflector system aligned (if

present)?

On Line Mode:

the Master’s “Phase On” LED is

correctly lit but nothing happens (no

reading results).

• Is the software configuration consistent with

the application condition (operating mode,

etc.)?

In the Genius™ software configuration

program select the OPERATING MODES

folder and check for related parameters.

Serial On Line Mode:

the reader is not triggered (no reading

results).

• In the Genius™ program select the

OPERATING MODE folder and check if

serial on line is enabled as “On Line options”

parameter value.

• Are the Start-Stop string correctly assigned?

• Is the serial trigger source correctly

connected and configured)

1 2 ... 81 82 83 84 85 86 87 88 89 90 91 ... 96 97

Comentarios a estos manuales

Sin comentarios

Datalogic DX8200A Manual de instalación Pagina 86

Comentarios a estos manuales

Relacionado con productos y manuales para Lectores De Códigos De Barras Datalogic DX8200A