Datalogic DX8200A-3010 Manual de instalación descargar pdf (Pagina 29)

INSTALLATION

2 INSTALLATION

To install the system follow the given procedure:

1. Select the mounting location for DX8200A;

2. Mount the DX8200A scanner;

3. Position the scanner with respect to the barcode;

4. Proceed with system electrical connection;

5. Install the Genius™ program on the PC and configure the scanner.

WARNING

When installing several scanners, take care to position them correctly so

that no laser beam enters the reading window perpendicularly and at the

same level of the output beam of the other scanners. This condition could

occur more frequently for side mounted applications. If these precautions

are not followed, it may occur that the laser of the blinded scanner starts

blinking due to an internal circuit which temporarily turns the laser off when

detecting a power anomaly. To resolve this problem, it is sufficient to slightly

change the inclination and position of one of the two scanners involved.

NOTE

Refer to the Reference Documentation for details on connecting your

DX8200A reader to other devices in the system (i.e. CBX100 etc.).

2.1 PACKAGE CONTENTS

Verify that the DX8200A reader and all the parts supplied with the equipment are present

and intact when opening the packaging; the list of parts includes:

 DX8200A reader

 Reference Point Stops with washers to aid mounting (2)

 Installation Quick Reference + barcode test chart

 DX8200A configuration CD-ROM

Figure 4 - DX8200A Package Contents

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 138 139

Sin comentarios

Datalogic DX8200A-3010 Manual de instalación Pagina 29