Datalogic DX8200A-3010 Manual de instalación Pagina 121
- Pagina / 139
- Tabla de contenidos
- SOLUCIÓN DE PROBLEMAS
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
TROUBLESHOOTING
105
11
11 TROUBLESHOOTING
NOTE
Before contacting your local Datalogic office or Datalogic Partner or ARC, it
is suggested to save the device configuration to a *.ddc file by means of the
Genius™ software configuration program and check the device exact model
and serial number.
TROUBLESHOOTING GUIDE
Problem Suggestion
Power On:
the “Power On” LED is not lit.
Is power connected?
If using an external power supply (like PWR-
120), is it connected to the AC source?
If using rail power, does rail have power?
If using CBX100/CBX500, does it have power
(check switch and LED)?
Check if you are referring to the
26-pin connector or to the CBX100/CBX500
spring clamp connectors.
Measure voltage at pin 13 and 25 (for 26-pin
connector) or at spring clamp Vdc and GND
(for CBX100/CBX500).
On Line Mode:
the Master’s “Phase On” LED is not lit
(when external trigger/PS activates).
Check carefully if you are referring to the
26-pin connector or to the CBX100/CBX500
spring clamp connectors.
Is sensor connected to EXT TRIG/PS input?
Is power supplied to photo sensor?
Is power supplied to one out of the two EXT
TRIG/PS (NPN output)?
Is one out of the two EXT TRIG/PS grounded
(PNP output)?
Are the photo sensor LEDs (if any) working
correctly?
Is the sensor/reflector system aligned (if
present)?
On Line Mode:
the Master’s “Phase On” LED is
correctly lit but nothing happens (no
reading results).
Is the software configuration consistent with
the application condition (operating mode,
etc.)?
In the Genius™ software configuration
program select the OPERATING MODES
folder and check for related parameters.
Serial On Line Mode:
the reader is not triggered (no reading
results).
In the Genius™ program select the
OPERATING MODE folder and check if
serial on line is enabled as “On Line options”
parameter value.
Are the Start-Stop string correctly assigned?
Is the serial trigger source correctly
connected and configured)
- Reference Manual 1
- CONTENTS 3
- REFERENCES 6
- COMPLIANCE 7
- POWER SUPPLY 8
- CE COMPLIANCE 9
- FCC COMPLIANCE 9
- GENERAL VIEW 10
- GUIDE TO INSTALLATION 13
- 1 INTRODUCTION 17
- DX8200A - 3 X Y Z 19
- 1.5 KEYPAD AND DISPLAY 20
- 1.5.1 Internal Net 20
- 1.5.2 Test Mode 21
- 1.5.3 PackTrack (Auto) 21
- USING SCANNER MENU 22
- 1.6.3 Auto PackTrack Setup 24
- INTRODUCTION 25
- 1.7 ACCESSORIES 27
- Fieldbus) 28
- 2 INSTALLATION 29
- 2.2 MECHANICAL MOUNTING 30
- 2.2.1 Mounting the Scanner 30
- INSTALLATION 31
- CBX ELECTRICAL CONNECTIONS 33
- 3.1 POWER SUPPLY 34
- 3.2 MAIN SERIAL INTERFACE 35
- Function 36
- Multidrop Cable 39
- Reference 40
- USER INTERFACE 40
- MEP-593 PH-1 Photocell (PNP) 42
- OEK-1 Encoder (PNP) 43
- In put De vi ce (Enc oder) 43
- 9-pin male connector 48
- 25-pin male connector 48
- 4.1 POWER SUPPLY 50
- 4.2 MAIN SERIAL INTERFACE 51
- 4.2.1 RS232 Interface 52
- 4.3 AUXILIARY INTERFACE 56
- 4.4 INPUTS 56
- EXTERNAL TRIGGER/ENCODER 57
- 4.4.1 Code Verifier 59
- 4.5 OUTPUTS 59
- DX8200A USER INTERFACE 60
- 4.6 USER INTERFACE 61
- 5 LONWORKS CONNECTIONS 62
- 5.1 NETWORK TERMINATION 63
- 5.2 LONWORKS INTERFACE 64
- LONWORKS CONNECTIONS 65
- 6 FIELDBUS CONNECTIONS 66
- FIELDBUS CONNECTIONS 67
- 6.3 DEVICENET INTERFACE 69
- 6.4 PROFIBUS INTERFACE 70
- 7 TYPICAL LAYOUTS 71
- TYPICAL LAYOUTS 73
- Minimum Distance 75
- 7.1.3 Redundant System 76
- 7.1.4 Multidata Network 78
- 7.1.5 Fieldbus Networks 79
- 8 SOFTWARE CONFIGURATION 81
- Test Operating Mode 82
- On Line Operating Mode 83
- Automatic Operating Mode 83
- Net-Autoset 86
- Express Network Setup 86
- Network Wizard 87
- SOFTWARE CONFIGURATION 89
- 8.4 PARAMETER DEFAULT VALUES 92
- 9 READING FEATURES 97
- 9.2 PACKTRACK™ 98
- PackTrack™ Reference System 99
- DX8200A REFERENCE MANUAL 100
- READING FEATURES 101
- Auto PackTrack Setup 103
- Auto PackTrack Report 106
- Scanner Direction 108
- PS Offset 109
- 9.3 PERFORMANCE 112
- 9.3.1 Reading Conditions 113
- 9.4 READING DIAGRAMS 115
- 10 MAINTENANCE 119
- 11 TROUBLESHOOTING 121
- 12 TECHNICAL FEATURES 124
- TECHNICAL FEATURES 125
- A ALTERNATIVE LAYOUTS 126
- Fieldbus 127
- Network 127
- PASS THROUGH 129
- RS232 MASTER/SLAVE 130
- MULTIPLEXER 132
- GLOSSARY 133
- DECLARATION OF CONFORMITY 138
Relacionado con productos y manuales para Lectores De Códigos De Barras Datalogic DX8200A-3010
(2 paginas)
(20 paginas)© 2020, manymanuals.es. Todos los derechos reservados | 0.047 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales