Datalogic DS2100N Manual de usuario descargar pdf (Pagina 27)

Setup Procedure Using Programming Barcodes

For Matrix 410 or Matrix 210 Ethernet readers

having software 6.10 or later, you can Enable

the DHCP Addressing by reading the following programming barcode.

Ì$CBETHE$-ÈÎ

Embedded Ethernet TCP/IP enabled

DHCP enabled

Using the X-PRESS™ interface setup functions described in the Quick Reference Guide,

correctly position the reader and read the barcode with the Learn function

The reader can now communicate using the Embedded Ethernet TCP/IP with DHCP

addressing.

For reader configuration through VisiSet™ using Embedded Ethernet TCP/IP with DHCP,

follow the procedures in par. 2.3.1.

The Factory Default sta

tic IP address parameter settings for Embedded Ethernet for all

Matrix 410 or Matrix 210 readers are:

 IP Address = 172.24.24.1

 Subnet Mask = 255.255.0.0

 Gateway Address = 172.24.255.254

NOTE

For Matrix 410™ or Matrix 210™ Ethernet models, Ethernet TCP/IP is

enabled with the above static IP address parameter settings by default.

Therefore, to disable the DHCP for the Embedded Ethernet it is necessary

to Restore the Factory Default (see par. 1.3).

Except Matrix 210™ UHD models.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 33 34

Sin comentarios

Datalogic DS2100N Manual de usuario Pagina 27